Wi-Fi Technology

Information about Wi-Fi Technology

Published on February 26, 2011

Author: ni3as

Source: authorstream.com

Content

Slide 1: Technology Slide 2: Presented By Shinde Nitin Ashok Slide 3: TABLE OF CONTENTS Introduction Wi-Fi Technologies Wi-Fi Architecture Wi-Fi Network Elements How a Wi-Fi Network Works Wi-Fi Network Topologies Wi-Fi Configurations Applications of Wi-Fi Advantages/ Disadvantages of Wi-Fi Slide 4: INTRODUCTION Wireless Technology is an alternative to Wired Technology, which is commonly used, for connecting devices in wireless mode. Wi-Fi (Wireless Fidelity) is a generic term that refers to the IEEE 802.11 communications standard for Wireless Local Area Networks (WLANs). Wi-Fi Network connect computers to each other, to the internet and to the wired network . Slide 5: THE Wi-Fi TECHNOLOGY Wi-Fi Networks use Radio Technologies to transmit & receive data at high speed : IEEE 802.11b IEEE 802.11a IEEE 802.11g Slide 6: IEEE 802.11b Appear in late 1999 Operates at 2.4GHz radio spectrum 11 Mbps (theoretical speed) - within 30 m Range 4-6 Mbps (actual speed) 100 -150 feet range Most popular, Least Expensive Interference from mobile phones and Bluetooth devices which can reduce the transmission speed. Slide 7: IEEE 802.11a Introduced in 2001 Operates at 5 GHz (less popular) 54 Mbps (theoretical speed) 15-20 Mbps (Actual speed) 50-75 feet range More expensive Not compatible with 802.11b Slide 8: IEEE 802.11g Introduced in 2003 Combine the feature of both standards (a,b) 100-150 feet range 54 Mbps Speed 2.4 GHz radio frequencies Compatible with ‘b’ Slide 9: ELEMENT OF A Wi-Fi NETWORK Access Point (AP) - The AP is a wireless LAN transceiver or “base station” that can connect one or many wireless devices simultaneously to the Internet. Wi-Fi cards - They accept the wireless signal and relay information.They can be internal and external.(e.g PCMCIA Card for Laptop and PCI Card for Desktop PC.) Safeguards - Firewalls and anti-virus software protect networks from uninvited users and keep information secure. Slide 10: HOW A Wi-Fi NETWORK WORKS? Basic concept is same as Walkie talkies. A Wi-Fi hotspot is created by installing an access point to an internet connection. An access point acts as a base station. When Wi-Fi enabled device encounters a hotspot the device can then connect to that network wirelessly. A single access point can support up to 30 users and can function within a range of 100 – 150 feet indoors and up to 300 feet outdoors. Many access points can be connected to each other via Ethernet cables to create a single large network. Slide 11: Wi-Fi NETWORK TOPOLOGIES AP-based topology (Infrastructure Mode) Peer-to-peer topology (Ad-hoc Mode) Point-to-multipoint bridge topology Slide 12: AP BASED TOPOLOGY The client communicate through Access Point. BSA-RF coverage provided by an AP. ESA-It consists of 2 or more BSA. ESA cell includes 10-15% overlap to allow roaming. Slide 13: PEER-TO-PEER TOPOLOGY AP is not required. Client devices within a cell can communicate directly with each other. It is useful for setting up of a wireless network quickly and easily. Slide 14: POINT-TO-MULTIPOINT BRIDGE TOPOLOGY This is used to connect a LAN in one building to a LANs in other buildings even if the buildings are miles apart. These conditions receive a clear line of sight between buildings. The line-of-sight range varies based on the type of wireless bridge and antenna used as well as the environmental conditions. Slide 15: Wi-Fi CONFIGURATIONS Slide 16: Wi-Fi CONFIGURATIONS Slide 17: Wi-Fi APPLICATIONS Home Small Businesses or SOHO Large Corporations & Campuses Health Care Wireless ISP (WISP) Travellers Slide 18: ADVANTAGES Mobility Easy of Installation Good Flexibility Cost Reliability Security Use unlicensed part of the radio spectrum Roaming Speed is high. Slide 19: LIMITATIONS Interference Degradation in performance High power consumption Limited range Slide 20: THANK YOU

Related presentations


Other presentations created by ni3as

ZigBee
26. 02. 2011
0 views

ZigBee