AIR MUSCLES

Information about AIR MUSCLES

Published on January 3, 2012

Author: ankush85

Source: authorstream.com

Content

PowerPoint Presentation: A Presentation On AIR MUSCLES- Humanoid Robotics for Polio Patients & Limbs Amputees and Artificial Hands Abstract : Abstract Air muscle is essentially a robotic actuator which is replacing the conventional pneumatic cylinders at a rapid pace. Due to their low production costs and very high power to weight ratio, as high as 400:1, the preference for Air Muscles is increasing. Air Muscles find huge applications in biorobotics and development of fully functional prosthetic limbs, having superior controlling as well as functional capabilities compared with the current models. This paper discusses Air Muscles in general, their construction, and principle of operation, operational characteristics and applications. Introduction : Introduction Robotic actuators conventionally are pneumatic or hydraulic devices. They have many inherent disadvantages like low operational flexibility, high safety requirements, and high cost operational as well as constructional etc. The search for an actuator which would satisfy all these requirements ended in Air Muscles. They are easy to manufacture, low cost and can be integrated with human operations without any large scale safety requirements. Further more they offer extremely high power to weight ratio of about 400:1. As a comparison electric motors only offer a power ration of 16:1. Air Muscles are also called McKibben actuators named after the researcher who developed it. History : History It was in 1958 that R.H.Gaylord invented a pneumatic actuator which’s original applications included a door opening arrangement and an industrial hoist. Later in 1959 Joseph.L.McKibben developed Air Muscles. The source of inspiration was the human muscle itself, which would swell when a force has to be applied. They were developed for use as an orthotic appliance for polio patients. Clinical trials were realisd in 1960s. These muscles were actually made from pure rubber latex, covered by a double helical weave (braid) which would contract when expanded radially. This could actually be considered as a biorobotic actuator as it operates almost similar to a biological muscle. : Air Muscle Schematic- McKibben Model The current form air muscles were developed by the Bridgestone Company, famous for its tires. The primary material was rubber i.e. the inner tube was made from rubber. Hence these actuators were called Rubbertuators ’. PowerPoint Presentation: These developments took place around 1980s. Later in 1990s Shadow Robotic Company of the United Kingdom began developing Air Muscles. These are the most commonly used air muscles now and are associated with almost all humanoid robotic applications which were developed recently. Apart from Shadow another company called The Merlin Humaniform develops air muscles for the same applications, although their design is somewhat different from the Shadow muscles. Construction: Construction The Air Muscle consists of an inner rubber tube, which is often made from pure rubber latex. It is surrounded by a braided mesh. Air muscle construction [Shadow air muscle: 30mm] PowerPoint Presentation: The header at each end of the muscle consists of an Aluminium ring, and a Delrin plastic bung, with a female thread. This thread can be used as a means of attachment, and to allow air into or out of the muscle. The muscle is supplied with two Delrin fittings also. Working: Working The inner rubber tube is inflated by entering air at a pressure, usually limited to 3.5 bar. The movement of this tube is constrained by the braid. When the tube gets inflated it experiences a longitudinal contraction. This would create a pull at both ends of the tube. Usually one end of the tube will be attached to somewhere so that force can be applied from one end. This pulls when effectively utolised could provide the necessary motion. PowerPoint Presentation: The working of the Air Muscle closely resembles that of the natural muscle and hence the name Muscle given to it along with Air. The figure below shows the physical appearance of the muscle at different stages of its working. PowerPoint Presentation: Air Muscle at different stages Theoretical Model: Theoretical Model Using conservation of energy and assuming the actuator maintains dV dP equal to zero, reasonable for actuators built with stiff braid fibers that are always in contact with the inner bladder, the tensile force produced can be calculated from: _____a PowerPoint Presentation: Where, P - the input actuation pressure, dV - the change in the actuator’s interior volume dL - the change in the actuator’s length V b - the volume occupied by the bladder dW - the change in strain energy density(change in stored energy/unit volume). PowerPoint Presentation: F­­­­ f describes the lumped effects of friction arising from sources such as contact between the braid and the bladder and between the fibers of the braid itself. Neglecting the second and third terms on the right hand side of above equation and assuming the actuator maintains the form of a right circular cylinder with an infinitesimally thin bladder yields known solutions. PowerPoint Presentation: The solution to the second term on the right side of the equation is based on a non-linear materials model developed by Mooney and Rivlin in the 1940’s and 1950’s proposed a relationship between stress (σ ) and strain (ε ) given by σ = dW dε where W is the strain energy density function. Using the assumptions of initial isotropy and incompressibility, W can be described as a function of two strain invariants ( I 1 and I 2 ): where C ij are empirical constants. PowerPoint Presentation: Mooney-Rivlin constants ( C 10 =118.4 kPa and C 01 =105.7 kPa) were necessary for accurate results with the natural latex rubber bladder, however, other materials may require additional constants. For the case of the McKibben actuator, the experimental methods required to determine these constants are dramatically simplified because the McKibben actuator’s strain invariants, constrained by braid kinematics, are nearly the same as the strain invariants for uniaxial tension .This fortuitous relationship eliminates the need for multi-axial testing that would otherwise be necessary. PowerPoint Presentation: Solving equation a using the non-linear Mooney-Rivlin materials model results in a McKibben actuator model whose structure is allowed to deform as well as store elastic energy in a non-linear fashion. This model is given by: PowerPoint Presentation: where F mr is the predicted force, and parameters N , L o , B, and R o are shown in figure 1 and figure 2. Bladder thickness is denoted by t o and is used in the bladder volume calculation. λ 1 refers to the actuator’s longitudinal stretch ratio and is given by λ 1 = L i / L o , where L i is the actuator’s instantaneous length and L o is the original, resting state length. PowerPoint Presentation: McKibben actuators are fabricated from two principle components: an inflatable inner bladder made of a rubber material and an exterior braided shell wound in a double helix. At ambient pressure, the actuator is at its resting length (figure: 1). As pressure increases, the actuator contracts proportionally until it reaches its maximally contracted state at maximum pressure (figure: 2). The amount of contraction is described by the actuator’s longitudinal stretch ratio given by λ1 = Li Lo where L is the actuator’s length, and subscript i refers to the instantaneous dimension and the subscript o refers to the original, resting state dimension. Estimation of Frictional Effects: Estimation of Frictional Effects The third term on the right of equation a represents these frictional losses which are a function of ( 1 ) braid material, ( 2 ) bladder material, ( 3 ) pressure, and ( 4 ) actuator length. In lieu of a model that incorporates a function for each of these, we have taken the intermediate step of lumping all of these effects into a single parameter ( F f ) as a simple function of pressure. PowerPoint Presentation: Analysis of the experimental data and theory predictions ( F mr ) suggests a linear form given by: F f = mP + b where m and b are empirically determined constants. The actuator model, which now includes the geometry of the braid and bladder, the material properties of the bladder, and a term for frictional effects (all three terms of equation a ) is given by: F = F mr − F f PowerPoint Presentation: A comparison of this model versus experimental results for the largest actuator (nominal braid diameter of 1-1/4 in.) is presented in figure 3.5. The figure shows a reasonably close fit for each of the four activation pressures tested. Similar results were obtained for the two smaller actuators (nominal braid diameters of ¾ and 1/2) but are not shown. Dynamic Properties: Dynamic Properties To measure the force-velocity properties of the McKibben actuator, a series of experiments were conducted with the axial-torsional Bionix (MTS Systems Corp., Minnesota, and U.S.A.) tensile testing instrument. Actuators of three sizes were constructed and tested. Each experiment measured the force output at a constant pressure over the contraction range at various velocities. One end of the actuator was rigidly attached to the load cell while the other end was moved in response to the instrument’s digital controller. PowerPoint Presentation: Step velocity profiles were applied such that one end of the actuator was rapidly accelerated and held to a constant velocity until the end of the actuator’s working length was reached. Input step velocity profiles tested included 1, 10, 25, 50, 100, 150, 200, 250, and 300 mm/s for concentric contractions and 1, 10, 25, 50, 100, and 150 mm/s for eccentric contractions. Up to 500 mm/s is possible; however, instantaneous fluctuations in velocity of 15 percent were measured during trails at 500 mm/s. PowerPoint Presentation: The magnitude of these fluctuations decreased at lower velocities, and was less than 9 percent at 300 mm/s and 6 percent at 200 mm/sec. This anomaly is thought to arise from the hydraulic pump. Experimental Results: Experimental Results The experimentally measured output force of a single McKibben actuator, plotted as a function of both length and velocity, is shown in figure 4. The results shown are from an actuator whose nominal braid diameter was ¾ inch and constructed with a natural latex bladder. The actuator pressure was 5 bar and the original, resting state length of the actuator was 180 mm. The output force is clearly a function of length, but not of velocity. Similar results were obtained at lower pressures and with the other two sized actuators, but are not shown. Operating Characteristics: Operating Characteristics The characteristics of Muscles as given by the Shadow Robotic company. 45 N load Specifications for a typical Air Muscle (the Shadow company): Specifications for a typical Air Muscle (the Shadow company) Diameter Weight Pull (3.5 bar) Maximum pull Length 30 mm 80 g 35 kg 70 kg 290 mm (stretched) PowerPoint Presentation: Stretched form PowerPoint Presentation: These measurements are taken when the muscle is fully stretched out, under a load of at least 50N, and a pressure of 0 bar. Hole – Hole Spacing 290mm Total Muscle Length 250mm Active Length 230mm 1: The Hole-Hole spacing is the distance between the holes in the fittings at either end of the muscle. This is adjustable, as the fittings can be screwed in or out. PowerPoint Presentation: They can also be removed entirely, creating a more compact muscle. Use an M10 screw instead, and remember to use PTFE tape to ensure a good seal. 2: The Total Muscle Length is the length of the whole muscle, excluding the fittings. 3: The Active Length is the length of the part of the muscle which contracts under pressure, and does not include the headers. PowerPoint Presentation: These measurements are taken when the muscle is pressurised to 3bar, with a load of 50N. Hole – Hole Spacing 210mm Total Muscle Length 170mm Active Length 150mm Contracted form Differences from pneumatic cylinders: Differences from pneumatic cylinders The Air Muscle is a low pressure actuator with a set of operational features unique in the field of robotics and automation a) - Smooth jerk free motion from start to finish due to the complete lack of stiction, the feature of standard actuators which produces the characteristic jerk so well known in air operated devices. PowerPoint Presentation: b) - Compliance - Although they can produce the force needed to move a function the Air Muscle will also yield when an obstacle is encountered, thus preventing damage to the object and the "Arm" - a distinct advantage where robots mix with humans. c) - Light weight - The materials from which the Air Muscle is made are non-metallic and give it a relatively high power-to-weight ratio - a critical feature in choosing an actuator for a mobile robot Advantages of Air Muscles: Advantages of Air Muscles Power to weight ratios in excess of 1 kW/kg, by way of comparison, electric drives typically has some 100 W/kg A varying force-displacement relation at constant gas pressure, contrary to pneumatic cylinders, which results in a muscle-like behavior; an adjustable compliance, due to gas compressibility and the dropping force-displacement characteristics PowerPoint Presentation: A maximum displacement or stroke of up to 50% of initial length The absence of friction and hysteresis, as opposed to other types of PAMs The ability to operate at a wide range of gas pressures, and thus to develop both very low and very high pulling forces The possibility of direct connection to a robotic joint, i . e . without having to use any gears, because of their high output forces at all speeds. Some of the advantages spelt out by the shadow company typical to their products are:- PowerPoint Presentation: Lightweight - Air Muscles weigh as little as 10 gm - particularly useful for weight-critical applications Lower Cost - Air Muscles are cheaper to buy and install than other actuators and pneumatic cylinders Smooth - Air Muscles have no 'stiction' and have an immediate response. This results in smooth and natural movement. Flexible - Air Muscles can be operated when twisted axially, bent round a corner, and need no precise aligning. PowerPoint Presentation: Powerful - Air Muscles produce an incredible force especially when fully stretched. Damped - Air Muscles are self-dampening when contracting (speed of motion tends to zero), and their flexible material makes them inherently cushioned when extending. Compliant - Being a soft actuator, Air Muscles systems are inherently compliant. Efficient - a muscle length can be maintained with minimal energy input. Fast -full contraction can be achieved in less than one second from rest. Disadvantages: Disadvantages The force which can be applied is only tensile in nature. For both kinds of forces additional mechanisms are required. The efficiency of Air Muscles is not as good as electric motors Its total displacement is only about 20% to 30% of its initial length Friction between the netting and the tube leads to a substantial hysteresis in the force-length characteristics; this obviously has an adverse effect on actuator behavior and necessitates using complex models and control algorithms PowerPoint Presentation: Rubber is often needed to avoid the tube from bursting, this comes at the cost of a high threshold pressure—typically about 90 kPa —that has to be overcome in order to start deforming the rubber material and below which the actuator will simply not operate. Rubber deformation, like any material deformation, needs energy, this will lower the force output of this type of muscle up to 60% . Applications: Applications Humanoid robots The major application of Air Muscles is in the field of humanoid robots. As these actuators nearly resemble the characteristics of actual skeletal muscles, they can perform a verity of functions as is performed by the human hand . Coupled with the implementation of neural networks and powerful, precise sensors they are capable of high end applications such as assembling of very minute components etc. PowerPoint Presentation: Humanoid robot manufactured by Shadow robotic company Artificial limbs: Artificial limbs Artificial limb developed at the bio robotics Lab, University of Washington. PowerPoint Presentation: At the bio robotic lab of university of Washington the limb as shown figure was developed. The major requirements of their research team were: Continuous and extended operation for about 8-10 hours. Low weight Quieter operation User satisfaction No maintenance or low levels of maintenance. PowerPoint Presentation: To satisfy all the fore mentioned requirements to be satisfied, a research team might spend years. But partially these feats were accomplished. The figure given below illustrates this. PowerPoint Presentation: Merlin Humaniform Air Muscles attached to human hand The Dexterous hands The dexterous hand was developed by the Shadow robotic company. The hands operate just like human hands with five fingers. It is powered by 28 Air Muscles. The size is almost same as human hands as they closely fit into a human hand. The figure shown illustrates this fact. PowerPoint Presentation: The muscle can perform any function the human hand performs. Besides it is equipped to swivel its fingers. It makes use of 28 Air muscles for these movements. The human hand has 24 muscles. The additional four in case Dexterous hands due to the swiveling motion. Further developments: Further developments The Pleated Pneumatic Air Muscles [PPAMs]: As a result growing research in the field of Air Muscles, another variant called pleated pneumatic air muscles were developed. Pleated pneumatic artificial muscles are strong and lightweight actuators that perform very well in position control and other automation and robotic tasks. They are easy to use, require no gearing and are easy to connect and replace. A high degree of positioning accuracy is accomplished with them and this just by using off-the-shelf pressure regulating servo-valves together with simple PI control techniques. PowerPoint Presentation: Furthermore, they can easily be made to have a soft touch so as not to damage fragile objects or to effect a safe man-machine interaction. Because of their inherent characteristics PPAMs are suitable for powering walking and running machines. Autonomous machine operation can then be guaranteed in a number of ways, e . g . by using on-board small size internal combustion engines. Some of the stated advantages of PPAMs are:- A maximum displacement or stroke of up to 50% of initial length. The absence of friction and hysteresis, as opposed to other types of PAM. PowerPoint Presentation: The pleated pneumatic Air Muscles Conclusion: Conclusion Even though Air Muscles are not capable of offering an extremely wide range of operations, but in the case of artificial legs, humanoid robots etc they offer a wide range of possibilities. With further developments in neural networks and sensor equipments, it might be possible replace an entire limb for an amputee and function normally like a natural limb would do. The only draw back lies in developing a complete theoretical model for calculating the characteristics such as fatigue etc. PowerPoint Presentation: Research is also directed towards substituting for Air with nitrogen or other gases for maximum efficiency and better damping. References: References Published Papers [source: The internet] Measurement and Modeling of McKibben Pneumatic Artificial Muscles Ching-Ping Chou Blake Hannaford Department of Electrical Engineering FT-10 University of Washington Seattle, Washington 98195 PowerPoint Presentation: Pleated Pneumatic Artificial Muscles: Compliant Robotic Actuators Frank DAERDEN, Dirk LEFEBER, Bj¨orn VERRELST, Ronald VAN HAM VRIJE UNIVERSITEIT BRUSSEL Department of Mechanical Engineering / Multibody Mechanics Group Pleinlaan 2, 1050 Brussel, Belgium [email protected] PowerPoint Presentation: Dynamic Pneumatic Actuator Model for a Model-Based Torque Controller Joachim Schr¨oder _ Center for Intelligent Systems Vanderbilt University Nashville, TN, USA http://eecs.vanderbilt.edu/CIS/ [email protected] PowerPoint Presentation: Duygun Erol Center for Intelligent Systems Vanderbilt University Nashville, TN, USA http://eecs.vanderbilt.edu/CIS/ Kazuhiko Kawamura, Ph.D. Center for Intelligent Systems Vanderbilt University Nashville, TN, USA http://eecs.vanderbilt.edu/CIS/ PowerPoint Presentation: R¨udiger Dillmann , Dr.- Ing . Industrial Applications of Informatics and Microsystems University of Karlsruhe (TH) Karlsruhe, Germany http://wwwiaim.ira.uka.de/ Design and Construction of An Artificial Limb Driven by Artificial Muscles for Amputees Sunton Wongsiri Department of Orthopaedic Surgery Prince of Songkla University, Hat Yai , PowerPoint Presentation: Songkhla , THAILAND 90112 Phone: 66-7445-1601, Fax: 66-7421-2915 Email: [email protected] Sathaporn Laksanacharoen Mechanical Engineering Department, King Mongkut’s Institute of Technology North Bangkok, 1518 Pibulsongkram Rd, Bangsue , Bangkok THAILAND 10800 Phone: 662-913-2500, Fax: 66-2586-9541 Email: [email protected] PowerPoint Presentation: Artificial Muscles: Actuators for Biorobotic Systems Glenn Kenneth Klute A dissertation submitted in partial fulfillment of the requirements for the degree of Books Advanced Mechanics of Solids L S Srinath Tata McGraw-Hill Publishing Company Limited, New Delhi. PowerPoint Presentation: Websites www.shadow.org.uk www.brl.washington.edu www.robotstoreuk.com www.kis.uiuc.edu http://teams.kipr.org http://biorobotics.cwru.edu PowerPoint Presentation: THANKS

Related presentations


Other presentations created by ankush85

Nanotechnology
03. 04. 2009
0 views

Nanotechnology

Human Resource Management System
06. 03. 2009
0 views

Human Resource Management System

Nanotechnology
27. 03. 2009
0 views

Nanotechnology

INTRODUCTION TO NANOTECHNOLOGY
20. 11. 2009
0 views

INTRODUCTION TO NANOTECHNOLOGY

Nanotechnology in Sports
22. 11. 2009
0 views

Nanotechnology in Sports

Computer Architecture
14. 07. 2009
0 views

Computer Architecture

HR
18. 03. 2009
0 views

HR

Hospital Management System
08. 04. 2009
0 views

Hospital Management System

Welcome to Visual Basic
06. 03. 2009
0 views

Welcome to Visual Basic

HTML
20. 04. 2009
0 views

HTML

Computer Languages
03. 06. 2013
0 views

Computer Languages

Taking Care of Computer
03. 06. 2013
0 views

Taking Care of Computer

Understanding Camera
16. 10. 2012
0 views

Understanding Camera

Photography Technical Terms
25. 09. 2012
0 views

Photography Technical Terms

Basics of Photography
25. 09. 2012
0 views

Basics of Photography

Molecular Nanotechnology
24. 11. 2009
0 views

Molecular Nanotechnology

Nanotech Innovation
22. 11. 2009
0 views

Nanotech Innovation

FINANCIAL  MARKET
16. 05. 2009
0 views

FINANCIAL MARKET

Operating System
19. 04. 2009
0 views

Operating System

Management Control
10. 07. 2009
0 views

Management Control

Accounting Principles
01. 07. 2009
0 views

Accounting Principles

Balance Sheet
21. 07. 2009
0 views

Balance Sheet

Balance Sheet Auditing
01. 07. 2009
0 views

Balance Sheet Auditing

BRANCH AND BOUND
05. 03. 2009
0 views

BRANCH AND BOUND

THE  THREE  BRANCHES  OF GOVERNMENT
13. 06. 2009
0 views

THE THREE BRANCHES OF GOVERNMENT

Structure of Atom
11. 05. 2009
0 views

Structure of Atom

Compression Techniques
05. 03. 2009
0 views

Compression Techniques

DYNAMIC PROGRAMMING
06. 03. 2009
0 views

DYNAMIC PROGRAMMING

Quantum Mechanics
25. 08. 2009
0 views

Quantum Mechanics

Marketing Plan
19. 06. 2009
0 views

Marketing Plan

Book Keeping
24. 06. 2009
0 views

Book Keeping

DFDS
02. 10. 2008
0 views

DFDS

Semiconductors
25. 04. 2009
0 views

Semiconductors

Organic  Chemistry
28. 04. 2009
0 views

Organic Chemistry

Atoms Molecules and Ions
17. 06. 2009
0 views

Atoms Molecules and Ions

Covalent Bond
25. 04. 2009
0 views

Covalent Bond

Cost Accounting Standards
25. 06. 2009
0 views

Cost Accounting Standards

Crisis Management
19. 06. 2009
0 views

Crisis Management

Marketing
18. 03. 2009
0 views

Marketing

Business Strategy
27. 04. 2009
0 views

Business Strategy

Time Management
23. 03. 2009
0 views

Time Management

Networking Protocols
23. 05. 2009
0 views

Networking Protocols

Network Layer
23. 05. 2009
0 views

Network Layer

Final Accounts
24. 06. 2009
0 views

Final Accounts

ARTIFICIAL  INTELLIGENCE
03. 04. 2009
0 views

ARTIFICIAL INTELLIGENCE

Play with C
08. 04. 2009
0 views

Play with C

Software Development Cycle
23. 03. 2009
0 views

Software Development Cycle

THE GREEDY METHOD
06. 03. 2009
0 views

THE GREEDY METHOD

JOB SEQUENCING
06. 03. 2009
0 views

JOB SEQUENCING

Electricity and Magnetism
29. 04. 2009
0 views

Electricity and Magnetism

Optical Fiber
24. 05. 2009
0 views

Optical Fiber

Quality Assurance
06. 03. 2009
0 views

Quality Assurance

Object-oriented Design
11. 04. 2009
0 views

Object-oriented Design

A.R. Rahman
08. 03. 2009
0 views

A.R. Rahman

Hollywood Female Celebrities
13. 03. 2009
0 views

Hollywood Female Celebrities

Flow nets
04. 09. 2009
0 views

Flow nets

Energy and Nanotechnology
22. 11. 2009
0 views

Energy and Nanotechnology

LOGIC  DESIGN
06. 03. 2009
0 views

LOGIC DESIGN

VB-IDE
06. 03. 2009
0 views

VB-IDE

DLF IPL FINAL
25. 05. 2009
0 views

DLF IPL FINAL

MINIMUM SPANNING TREES
06. 03. 2009
0 views

MINIMUM SPANNING TREES

CPU Scheduling
05. 03. 2009
0 views

CPU Scheduling

Virtual Memory
05. 03. 2009
0 views

Virtual Memory

POK
09. 05. 2009
0 views

POK

2D Transformations
05. 03. 2009
0 views

2D Transformations

Greedy Algorithms
05. 03. 2009
0 views

Greedy Algorithms

BACKTRACKING
05. 03. 2009
0 views

BACKTRACKING

DIVIDE And CONQUER
06. 03. 2009
0 views

DIVIDE And CONQUER

ELEMENTARY DATA STRUCTURES
06. 03. 2009
0 views

ELEMENTARY DATA STRUCTURES

JPEG Compression
06. 03. 2009
0 views

JPEG Compression

Mpeg-compression
06. 03. 2009
0 views

Mpeg-compression

NP - HARD
06. 03. 2009
0 views

NP - HARD

TRAVELLING SALESPERSON PROBLEM
06. 03. 2009
0 views

TRAVELLING SALESPERSON PROBLEM

VBA Introduction
06. 03. 2009
0 views

VBA Introduction

Introduction to Java
09. 03. 2009
0 views

Introduction to Java

Java  Basics
09. 03. 2009
0 views

Java Basics

Heuristic Search
13. 03. 2009
0 views

Heuristic Search

HSM
19. 03. 2009
0 views

HSM

Tata's  Nano  Car
25. 03. 2009
0 views

Tata's Nano Car

Air Cranes
08. 04. 2009
0 views

Air Cranes

Newborn Care
10. 04. 2009
0 views

Newborn Care

Photosynthesis Process
10. 04. 2009
0 views

Photosynthesis Process

ActionScript
13. 04. 2009
0 views

ActionScript

Xml
15. 04. 2009
0 views

Xml

Snakes mis use
17. 04. 2009
0 views

Snakes mis use

Php Web Development
21. 04. 2009
0 views

Php Web Development

Cricket Intro
21. 04. 2009
0 views

Cricket Intro

Cricket Umpiring and Rules
21. 04. 2009
0 views

Cricket Umpiring and Rules

Arm and Forearm
23. 04. 2009
0 views

Arm and Forearm

Elements Ions Isotopes
25. 04. 2009
0 views

Elements Ions Isotopes

Chemical Bond
25. 04. 2009
0 views

Chemical Bond

Discovering Newtons Laws
29. 04. 2009
0 views

Discovering Newtons Laws

FreeFall
29. 04. 2009
0 views

FreeFall

Digital photography
26. 04. 2009
0 views

Digital photography

Health Effects of Alcohol
26. 04. 2009
0 views

Health Effects of Alcohol

Poetry Terminology
27. 04. 2009
0 views

Poetry Terminology

Indian Force
05. 05. 2009
0 views

Indian Force

Machine Intelligence
14. 05. 2009
0 views

Machine Intelligence

Data Link Layer
16. 05. 2009
0 views

Data Link Layer

Database Development Cycle
15. 05. 2009
0 views

Database Development Cycle

Queue
15. 05. 2009
0 views

Queue

Presentaion Skills
23. 04. 2009
0 views

Presentaion Skills

Network Layers
23. 05. 2009
0 views

Network Layers

Narmada Dam, India
23. 05. 2009
0 views

Narmada Dam, India

User Datagram Protocol
24. 05. 2009
0 views

User Datagram Protocol

Linear Momentum
28. 05. 2009
0 views

Linear Momentum

Stack and Queue
04. 06. 2009
0 views

Stack and Queue

Information Management
19. 06. 2009
0 views

Information Management

Role of Senior Management
19. 06. 2009
0 views

Role of Senior Management

Wake Up India
07. 06. 2009
0 views

Wake Up India

Adobe Flex 3.0
13. 06. 2009
0 views

Adobe Flex 3.0

Adobe Flex Presentation
13. 06. 2009
0 views

Adobe Flex Presentation

Introduction to Adobe Flex
13. 06. 2009
0 views

Introduction to Adobe Flex

Adobe Flash Media Server
13. 06. 2009
0 views

Adobe Flash Media Server

Dreamweaver
13. 06. 2009
0 views

Dreamweaver

Adobe Flash
13. 06. 2009
0 views

Adobe Flash

Flash CS4 Professional
13. 06. 2009
0 views

Flash CS4 Professional

Adobe Flash Lite
13. 06. 2009
0 views

Adobe Flash Lite

Digital Camera
13. 06. 2009
0 views

Digital Camera

Mozilla_Firefox
15. 06. 2009
0 views

Mozilla_Firefox

Managerial Accounting
27. 06. 2009
0 views

Managerial Accounting

Accounting  Information  System
01. 07. 2009
0 views

Accounting Information System

RETAILING AND MARKETING
06. 07. 2009
0 views

RETAILING AND MARKETING

ACCOUNTING IN BUSINESS
05. 07. 2009
0 views

ACCOUNTING IN BUSINESS

STRATEGIC RETAIL MANAGEMENT
05. 07. 2009
0 views

STRATEGIC RETAIL MANAGEMENT

Reiki
01. 08. 2009
0 views

Reiki

Using Buttons in PowerPoint
26. 04. 2009
0 views

Using Buttons in PowerPoint

Nanotechnology  for  Students
21. 08. 2009
0 views

Nanotechnology for Students

NANOSCIENCE
25. 08. 2009
0 views

NANOSCIENCE

Fundamentals of Nanoscience
27. 08. 2009
0 views

Fundamentals of Nanoscience

Nanoscience in Nature
27. 08. 2009
0 views

Nanoscience in Nature

Applied Mechanics
04. 09. 2009
0 views

Applied Mechanics

Accounts Payable Training
27. 06. 2009
0 views

Accounts Payable Training