Caterpillar cat 973 c track loader (prefix bcp) service repair manual (bcp00001 and up)

Information about Caterpillar cat 973 c track loader (prefix bcp) service repair manual...

Published on January 24, 2020

Author: ujdjfjjskekmm

Source: slideshare.net

Content

1. Service Repair Manual Models 973C TRACK LOADER

2. Shutdown SIS Previous Screen Product: TRACK LOADER Model: 973C TRACK LOADER BCP Configuration: 973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine Disassembly and Assembly 973C Track-Type Loader Powertrain Media Number -RENR8206-01 Publication Date -01/04/2010 Date Updated -28/04/2010 i02165395 Hydrostatic Drive Oil Tank - Remove and Install SMCS - 5056-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 138-7575 Link Bracket 1 Start By: A. Remove the cab. Refer to Disassembly and Assembly, "Cab - Remove". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. 1/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

3. Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system. 1. Drain the oil tank for the hydrostatic drive into a suitable container. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the tank. Illustration 1 g01094830 2. Disconnect hose assembly (1) . 2/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

4. Illustration 2 g01094924 3. Disconnect hose assemblies (3) and hose assemblies (5) from block (4). Disconnect clip (6) from tank assembly (2) . 3/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

5. Illustration 3 g01094928 4. Disconnect hose assemblies (7) from tank assembly (2) . 4/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

6. Illustration 4 g01094940 5. Attach Tooling (A) and a suitable lifting device to tank assembly (2). Remove bolts (8), the washers, and the mounting from tank assembly (2). Remove bolts (9), the washers, and the mounting from tank assembly (2). Remove bolts (11), the washers, and the mounting from tank assembly (2). Disconnect harness assembly (10) from the bottom of tank assembly (2) . 6. Remove tank assembly (2) from the machine. The weight of tank assembly (2) is approximately 34 kg (75 lb). Installation Procedure Table 2 Required Tools Tool Part Number Part Description Qty A 138-7575 Link Bracket 1 NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers 5/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

7. before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 5 g01094940 1. Attach Tooling (A) and a suitable lifting device to tank assembly (2) and position tank assembly (2) to the machine. The weight of tank assembly (2) is approximately 34 kg (75 6/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

8. lb). Install bolts (8), the washers, and the mounting to tank assembly (2). Install bolts (9), the washers, and the mounting to tank assembly (2). Install bolts (11), the washers, and the mounting to tank assembly (2). Connect harness assembly (10) to the bottom of tank assembly (2) . Illustration 6 g01094928 2. Connect hose assemblies (7) to tank assembly (2) . 7/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

9. Illustration 7 g01094924 3. Connect hose assemblies (3) and hose assemblies (5) to block (4). Connect clip (6) to tank assembly (2) . 8/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

10. Illustration 8 g01094830 4. Connect hose assembly (1) . 5. Refill the oil tank for the hydrostatic drive. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the tank. End By: Install the cab. Refer to Disassembly and Assembly, "Cab - Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 15:22:28 UTC+0800 2019 9/9973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

11. Shutdown SIS Previous Screen Product: TRACK LOADER Model: 973C TRACK LOADER BCP Configuration: 973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine Disassembly and Assembly 973C Track-Type Loader Powertrain Media Number -RENR8206-01 Publication Date -01/04/2010 Date Updated -28/04/2010 i02154475 Pump Drive - Remove SMCS - 3108-011-PD Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 138-7573 Link Bracket 3 B 8T-5255 Hydraulic Jack 1 Start By: A. Remove the hydraulic drive pumps. Refer to Disassembly and Assembly, "Hydraulic Drive Pump - Remove". Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. 1/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

12. Dispose of all fluids according to local regulations and mandates. Illustration 1 g01092358 1. Disconnect hose assembly (1) and tube assembly (1A) . 2/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

13. Illustration 2 g01092364 2. Attach a suitable lifting device to implement pump (2). Remove bolts (3) and remove implement pump (2) and the O-ring seal. The weight of implement pump (2) is approximately 45 kg (100 lb). 3/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

14. Illustration 3 g01092369 3. Disconnect tube assemblies (6). Remove clamps (4) and clamps (5) . 4/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

15. Illustration 4 g01092378 4. Disconnect harness assembly (7). Remove hose assembly (8). Disconnect hose assemblies (9) . 5/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

16. Illustration 5 g01092379 5. Remove tube assembly (10) and tube assembly (11) . 6/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

17. Illustration 6 g01092383 6. Attach Tooling (A) and a suitable lifting device to filter group (12). Remove bolts (13) and remove filter group (12). The weight of filter group (12) is approximately 25 kg (55 lb). 7/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

18. Illustration 7 g01092387 7. Disconnect harness assembly (14) . 8/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

19. Illustration 8 g01092389 8. Disconnect hose assemblies (15). Remove tube assembly (18). Remove bolts (17) and remove hydrostatic valve (16) . 9/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

20. Illustration 9 g01092398 9. Remove bracket (19). Remove clips (20). Remove bracket (21) . Illustration 10 g01092402 10/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

21. 10. Position Tooling (B) under flywheel housing (23) in order to support the rear of the engine. 11. Disconnect harness assembly (24). Remove bolts (22) . Illustration 11 g01092409 12. Attach Tooling (A) and a suitable lifting device to pump drive (25). Remove bolts (26) and remove pump drive (25). The weight of pump drive (25) is approximately 227 kg (500 lb). Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 15:23:17 UTC+0800 2019 11/11973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

22. Shutdown SIS Previous Screen Product: TRACK LOADER Model: 973C TRACK LOADER BCP Configuration: 973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine Disassembly and Assembly 973C Track-Type Loader Powertrain Media Number -RENR8206-01 Publication Date -01/04/2010 Date Updated -28/04/2010 i02149030 Pump Drive - Disassemble SMCS - 3108-015-PD Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 6V-3822 Forcing Bolts, M10 x 1.5 by 35mm 3 B 138-7575 Link Bracket 3 C 1P-0074 Slide Hammer 1 5F-7342 Adapter 1 D 8B-7551 Bearing Puller 1 E 1P-1855 Retaining Ring Pliers 1 Start By: A. Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. 1/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

23. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Illustration 1 g01090142 1. Remove bolts (1) from housing assembly (2) . 2/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

24. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.

25. Illustration 2 g00939458 2. Remove shut off valve (5) . 3. Use Tooling (A) to separate cover (3) from housing (4) . Illustration 3 g00979712 3/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

26. 4. Install Tooling (B) and a suitable lifting device to cover (3). Remove cover (3). The weight of cover (3) is approximately 66 kg (145 lb). Illustration 4 g00979705 5. Use Tooling (C) to remove seal (6) . 6. Remove ring (7). Use Tooling (E) in order to remove retaining rings (8). Remove bearing cups (9) . 4/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

27. Illustration 5 g00979706 7. Mark the location of drive gears (10) for assembly purposes. Remove drive gears (10) . 8. Remove temperature sending unit (11) . 5/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

28. Illustration 6 g00939459 9. Tooling (D) may be used for the removal of bearing cones (12), if necessary. 6/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

29. Illustration 7 g01090206 10. Remove bearing cups (13) from housing (4) . 11. Remove seal (14) with Tooling (C) . 12. Remove vent (15) . Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 15:24:06 UTC+0800 2019 7/7973C Track-Type Loader BCP00001-UP (MACHINE) POWERED BY C-9 Engine(S... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

Related presentations


Other presentations created by ujdjfjjskekmm