Forklift Standard 12 14 99

Information about Forklift Standard 12 14 99

Published on February 27, 2008

Author: Arkwright26

Source: authorstream.com

Content

Slide1:  Forklifts and Other Powered Industrial Trucks WAC 296-24-230 From WAC 296-24, Part D Materials Handling and Storage, Including Cranes, Derricks, Etc., and Rigging Slide2:  Employers should be able to determine if their Powered Industrial Truck operator training program complies with the new standard’s requirements for Truck-Related Topics Workplace-Related Topics Documentation of Training Slide3:  “Clear Rule Writing” Operator Training Requirements Non-Mandatory Guidelines Operator Restraints WRD On Order Pickers Included Updated National Consensus Standards Other Glycol no longer specified as the only antifreeze agent Other Industry standards affected What Is A “Powered Industrial Truck”?:  What Is A “Powered Industrial Truck”? “A mobile, power-propelled truck used to carry, push, pull, lift, stack, or tier materials. Powered industrial trucks are also commonly known as forklifts, pallet trucks, rider trucks, forktrucks, or lifttrucks.” [per American Society of Mechanical Engineers -- ASME] Which Of These Does the New Standard Require Operators To Be Trained On?:  Which Of These Does the New Standard Require Operators To Be Trained On? Is This A “Powered Industrial Truck”:  Is This A “Powered Industrial Truck” Is This A “Powered Industrial Truck”:  Is This A “Powered Industrial Truck” Is This A “Powered Industrial Truck”:  Is This A “Powered Industrial Truck” Is This A “Powered Industrial Truck”:  Is This A “Powered Industrial Truck” Is This A “Powered Industrial Truck”:  Is This A “Powered Industrial Truck” “Turning technique no longer specified”:  “Turning technique no longer specified” “While negotiating turns, speed shall be reduced to a safe level, by means of turning the hand steering wheel in a smooth, sweeping motion. Except when maneuvering at a very low speed, the hand steering wheel shall be turned at a moderate, even rate.” “While negotiating turns, speed must be reduced to a safe level.” The Old Way - The New Way Operator Training:  Operator Training Mandatory portion: WAC 296-24-23025 Non-Mandatory Appendix: WAC 296-24-23037 Slide14:  Mandatory: -296-24-23025 - Operator Training Safe Operation Training program implementation Training program content Refresher training and evaluation Avoidance of duplicative training Documentation Effective date Slide15:  The Other Part of Operator Training Non-Mandatory Appendix: (para 296-24-23037) Definitions General Basic Principles The Stability Triangle Longitudinal Stability Lateral Stability Dynamic Stability Effective Date March 1, 2000:  Effective Date March 1, 2000 Employer must ensure operators are trained, as appropriate, by the effective date of this section. Employees hired on or after the effective date of this section must be trained and evaluated prior to being assigned to operate a powered industrial truck. Other Industry Standards Affected:  Other Industry Standards Affected WAC 296-56 Longshore, Stevedore and Related Waterfront WAC 296-155 Construction WAC 296-307 Agriculture Slide18:  Since a large percentage of accidents and fatalities were due to operator inexperience, OSHA mandated that operators must be trained and competent. Forklift Fatalities By Percentages:  Forklift Fatalities By Percentages Forklift Accidents By Percentage:  Forklift Accidents By Percentage Overview of Requirements:  Overview of Requirements Employers must ensure operators are: Trained Competent Documented Training Program Implementation:  Training Program Implementation (a) Trainees may operate a powered industrial truck only: (i) under the direct supervision of persons who have the knowledge, training and experience to train operators and evaluate their competence; and (ii) Where such operation does not endanger the trainee or other employees 296-24-23025(2)(a) Training must consist of a combination of: :  Training must consist of a combination of: 1. Formal Instruction 2. Practical Training 3. Evaluation 296-24-23025(2)(b) Practical Training:  Practical Training Instructor or designee Demonstration Practical Exercise by Student Training Program Content:  Training Program Content “… operators must receive initial training in the topics that follow, except in topics that the employer can demonstrate are not applicable to safe operation of the truck in the employer’s workplace.” (a) Truck-related topics (b) Workplace-related topics WAC 296-24-23025(3 Slide27:  Truck-related topics General principles Specific to type Specific to forks or attachments Overview of Truck-Related Topics:  Overview of Truck-Related Topics General principles “Must receive” from -296-24-23025(3)(a): Operation instructions, warnings, and precautions for the types of truck the operator will be authorized operate; Differences between the truck and the automobile Truck controls and instrumentation: where they are located, what they do, and how they work Engine or motor operation Steering & maneuvering Overview of Truck-Related Topics - Continued:  Overview of Truck-Related Topics - Continued Visibility Fork and attachment adaptation, operation and use limitations Vehicle capacity Vehicle stability Operator-performed inspection & maintenance Refueling and/or battery charging Operation limitations Any other operation instructions, warning, or precautions 296-24-23025(3)(a) Overview of Truck-Related Topics - Continued:  Overview of Truck-Related Topics - Continued General principles “Must receive” from -296-24-23025(3)(a) Non-mandatory appendix at 296-24-23037 Definitions related to stability Basic principles The Stability Triangle Longitudinal Stability Lateral Stability Dynamic Stability Truck-Related Topics What each covers::  Truck-Related Topics What each covers: “Must receive” from WAC 296-24-23025(3)(a) Fork and attachment adaptation, operation and use limitations Non-mandatory appendix How fork and attachment adaptations change the forklift’s steering characteristics and stability Truck-Related Topics:  Truck-Related Topics “Must receive” from WAC296-24-23025(3)(a): Operating instructions, warnings, and precautions for the types of truck the operator will be authorized to operate General instructions for forklifts General safety items Listed in the operator’s manual Slide33:  Example from an Operator’s Manual Slide34:  Another Example from an Operator’s Manual Truck-Related Topics:  Truck-Related Topics Differences between the truck and automobile Suggested contents in non-mandatory appendix: 296-24-23037. Rear wheel steering Rear of truck swings out on turns Truck has triangular stability, not four-point Truck may have smaller size, but can have six times the weight! Truck-Related Topics:  Truck-Related Topics Truck controls and instrumentation where they are located what they do how they work Truck-Related Topics:  Truck-Related Topics Engine or motor operation Truck-Related Topics:  Truck-Related Topics Steering and maneuvering Truck-Related Topics:  Truck-Related Topics Visibility (including restrictions due to loading) Truck-Related Topics:  Truck-Related Topics Other items requiring training: other attachments carton grabbers barrel grabbers barrel grabbers which rotate Truck-Related Topics:  Truck-Related Topics Changes in attachments different capabilities of attachment: e.g. from single reach to double reach order picker changes in operator controls how change in attachment affects capacity how change in attachment affects stability Truck-Related Topics:  Truck-Related Topics Specific to forks or attachments Truck-Related Topics:  Truck-Related Topics Specific to forks or attachments Another example from Operator’s Manual Truck-Related Topics:  Truck-Related Topics Specific to forks or attachments Truck-Related Topics:  Truck-Related Topics Vehicle capability includes manufacturer’s plate includes charts indicating de-rating at mast height, etc Slide47:  Truck-related topics Can read and explain entries on the name plate The “Quick Check”on what the operator knows: Slide48:  An older kind of plate: The “Quick Check” on what the operator knows: Slide49:  Again: Can they read and interpret? The “Quick Check” on what the operator knows: Slide50:  Truck-related topics Can read and explain entries on the name plate Can locate, explain & interpret specification charts on capacity The “Quick Check” on what the operator knows: Truck-Related Topics:  Truck-Related Topics Vehicle stability Non-mandatory appendix: 296-24-23037 contains diagrams to explain the concept. Other diagrams in OSHA training program, on the Internet: www.osha-slc.gov/Training/PIT Stability of Powered Industrial Trucks:  Stability of Powered Industrial Trucks (1) Definitions to help explain the principle of stability (2) General principles of stability (3) Basic principles - the “physics” of stability; momentum, inertia, gravity (4) The Stability Triangle Non-mandatory Appendix 296-24-23027 Stability of Powered Industrial Trucks:  Stability of Powered Industrial Trucks The Stability Triangle (5) Longitudinal Stability (6) Lateral Stability Slide54:  Load CG Vertical Stability Line (Line of Action) Combined CG Truck CG Load CG Combined CG Vertical Stability Line (Line of Action) Truck CG The vehicle is stable This vehicle is unstable and will continue to tip over Stability of Powered Industrial Trucks The Stability Triangle (5) Longitudinal Stability (6) Lateral Stability Truck-Related Topics 296-24-23025 (3) (a):  Truck-Related Topics 296-24-23025 (3) (a) “Any vehicle inspection and maintenance that the operator will be required to perform.” Should be conducted per manufacturer’s specs: Vehicle condition Condition and thickness of forks Condition of hoses, mast chains, hydraulic rams Effectiveness of parking brake Tire inflation All other listed inspection points Slide56:  Example: In the simplest form…. Slide57:  Another example: Slide58:  And another example... Slide59:  Example Slide60:  .. To some very specific, detailed items. Slide61:  Example Slide62:  Example Slide63:  Example from OSHA: osha-slc.gov/Training/PIT/pit_checklist.html DAILY INSPECTION CHECKLIST Electric Forklift Truck KEY OFF Procedures •Overhead guard •Hydraulic cylinders •Mast assembly •Lift chains and rollers •Forks •Tires •Examine the battery •Check the hydraulic fluid level KEY ON Procedures •Check the gauges •Hour meter •Battery discharge indicator •Test the standard equipment •Steering •Brakes •Front, tail, and brake lights •Horn •Safety seat (if equipped) •Check the operation of load-handling attachments Truck-Related Topics 296-24-23025 (3) (a):  Truck-Related Topics 296-24-23025 (3) (a) Refueling and/or charging and recharging of batteries LP bottles Battery charging facilities Workplace-Related Topics 296-24-23025 (3) (a):  Workplace-Related Topics 296-24-23025 (3) (a) Ramps and other sloped surfaces Dock boards Bridge plates Truck-Related Topics 296-24-23025 (3) (a):  Truck-Related Topics 296-24-23025 (3) (a) “Any other operating instructions, warnings, or precautions listed in the operator’s manual for the types of vehicle that the employee is being trained to operate” Training Program Content:  Training Program Content Truck-related topics: 296-24-23025 (3) (a) Workplace-related topics 296-24-23025 (3) (b) Overview of Workplace-Related Topics 296-24-23025 (3) (b):  Overview of Workplace-Related Topics 296-24-23025 (3) (b) Surface conditions Composition of loads Load manipulation Pedestrian traffic Narrow aisles and other restricted places Hazardous locations Ramps & other sloped surfaces Potential carbon monoxide hazard locations Other unique or potentially hazardous conditions Workplace-Related Topics 296-24-23025 (3) (b) :  Workplace-Related Topics 296-24-23025 (3) (b) Surface conditions: Type(s) of normal driving surface Performance of truck’s tires on normal surface Surface conditions which may be encountered Water, snow, ice Effects on traction, stopping ability Uneven ground and/or potholes Effects on stability Gravel Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) Composition of loads to be carried Examples, from Non-mandatory appendix 296-24-23037: Irregular shaped loads and/or protrusions Changes to Center Of Gravity Partially filled containers of liquid Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) Load manipulation, stacking and unstacking For example: Reducing damage to powered industrial truck Avoiding stresses to forks from overload Welds on forks Detection of broken or defective pallets, or pallets with improper repairs Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) Pedestrian traffic in areas where vehicle will be operated Importance of training on pedestrian traffic::  Importance of training on pedestrian traffic: * * Important reminder that the driver is always the one responsible; never the pedestrian! Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) Narrow aisles Other restricted places; per existing paragraph 296-24-23027(7) including the inside of semi-truck trailers including the inside of railroad cars Workplace-Related Topics 296-24-23025 (3) (b) - Hazardous (classified) locations:  Workplace-Related Topics 296-24-23025 (3) (b) - Hazardous (classified) locations Ref: 296-24-23005 for 11 different designations of powered industrial truck appropriate to locations with explosive/combustible atmospheres Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) Potential carbon monoxide hazard locations Closed environments Insufficient ventilation Poor vehicle maintenance Workplace-Related Topics 296-24-23025 (3) (b):  Workplace-Related Topics 296-24-23025 (3) (b) “Other unique or potentially hazardous environmental conditions…” Per BLS data: 8% of all fatalities involving forklifts are from “driving off loading dock” General Workplace Safety Item::  General Workplace Safety Item: One of the most common, yet most hazardous, practices is having people riding on the forks!! This should be addressed in all training programs Refresher Training:  Refresher Training To Begin with: 296-24-23025(4)(C) An evaluation of each operator’s performance must be conducted at least once every three years…..to determine if they require refresher training. WAC 296-24-23025(4) Refresher Training:  Refresher Training If the operator received all required training truck-related workplace-related and is evaluated and found competent, no refresher training is required Refresher Training Is Required:  Refresher Training Is Required When the operator has been observed to operate the vehicle in an unsafe manner How do you know? Incident reports Safety committee minutes Maintenance reports Equipment damage “Shipping damage” Employee complaints Refresher Training Is Required:  Refresher Training Is Required The operator has been involved in an accident or near-miss incident require additional training. documented accidents which don’t have corresponding documentation of refresher training and evaluation are asking for trouble! “Quick Check” On Performance of Refresher Training::  “Quick Check” On Performance of Refresher Training: - What mechanism does the company have in place for: Maintenance to report driver-caused damage? Anyone to report a “near miss”? “Quick Check” On Performance of Refresher Training::  “Quick Check” On Performance of Refresher Training: Does the supervisor know who caused the damage? Was follow-up evaluation and/or training documented? Bent support Refresher Training Is Required:  Refresher Training Is Required Operator has received an evaluation that reveals the operator is not operating the truck safely. Refresher Training Is Required:  Refresher Training Is Required When the operator is assigned to drive a different type of truck: Are there differences? Are they significant? Refresher Training Is Required:  Refresher Training Is Required When a condition in the workplace changes in a manner that could affect safe operation of the truck. Operations Products/packaging Construction/remodeling Hundreds of other variables Avoidance of Duplicative Training WAC 296-24-23025(5):  Avoidance of Duplicative Training WAC 296-24-23025(5) If an operator has previously received training in a topic specified in (3) of this section, and such training is appropriate to the truck and working conditions encountered, additional training in that topic is not required if the operator has been evaluated and found competent to operate the truck safely, within three years. Required Documentation:  Required Documentation Operator’s name Date of training Date of evaluation Identity of trainer/evaluator Strongly recommended: outline of topics - both truck-specific and workplace-specific WAC 296-24-23025(6) Operator Restraints WAC 296-24-23027 Powered industrial truck operations:  Operator Restraints WAC 296-24-23027 Powered industrial truck operations Rule of thumb: Any sit down model of powered industrial truck manufactured since 1993 is required to have an operator restraint provided by the manufacturer. Slide92:  296-24-23027(15) An active operator protection restraint device (such as a seatbelt or lap-bar) or system must be used, when provided. Older Models:  Older Models But once they’ve been added they must be maintained and used We don’t require retrofit of operator restraints Slide95:  WRD 78-25A Forklift-type Equipment Used by “Order Pickers.” This WRD has been included in the standard Powered industrial trucks used as order pickers:  Powered industrial trucks used as order pickers ... which do not have standard guardrails on all open sides, must be equipped with an approved fall arrest system Order Pickers:  Order Pickers Acceptable fall protection Order Pickers:  Order Pickers Not acceptable fall protection Slide99:  Topics Covered: Clear Rule Writing Operator Training Requirement Operator Restraints Order Pickers We acknowledge the cooperation of::  We acknowledge the cooperation of: CB Equipment Co, Kent Hyster Sales and Service, Tukwila Bottom Line Loss Control Valley Rentals, Tumwater Home Depot, Lacey Ivy Hi-Lift, Tacoma Nordic Cold Storage, Seattle End of Presentation:  End of Presentation Components of a Forklift Truck*:  Components of a Forklift Truck* *One of the most common types of powered industrial trucks Classes of Commonly-Used Powered Industrial Trucks*:  Classes of Commonly-Used Powered Industrial Trucks* The Industrial Truck Association has placed powered industrial trucks into 7 classes. Class I - Electric motor rider trucks Class II - Electric motor narrow aisle trucks Class III - Electric motor hand trucks or hand/rider trucks Class IV - Internal combustion engine trucks (solid/cushion tires) Class V - Internal combustion engine trucks (pneumatic tires) Class VI - Electric and internal combustion engine tractors Class VII - Rough terrain forklift trucks * Note that this classification refers to commonly-used vehicles and does not include all powered industrial trucks covered by the OSHA standard. Class I - Electric Motor Rider Trucks:  Class I - Electric Motor Rider Trucks Counterbalanced rider type, stand up Three wheel electric trucks, sit-down Counterbalanced rider type, cushion tires, sit-down (high and low platform) Counterbalanced rider, pneumatic tire, sit-down (high and low platform) Refresher Training Is Required:  Refresher Training Is Required When the operator is assigned to drive a different type of truck: Refresher Training Is Required:  Refresher Training Is Required Are there differences? Are they significant? When the operator is assigned to drive a different type of truck: Class I - Electric Motor Rider Trucks:  Class I - Electric Motor Rider Trucks Class I - Electric Motor Rider Trucks:  Class I - Electric Motor Rider Trucks Counterbalanced Rider Type, Stand-Up Truck Classifications:  Truck Classifications Specific to type Type I: Sit-down rider, electric Class II - Electric Motor Narrow Aisle Trucks:  Class II - Electric Motor Narrow Aisle Trucks High lift straddle Order picker Reach type outrigger Side loaders, turret trucks, swing mast and convertible turret/stock pickers Low lift pallet and platform (rider) Class II - Electric Motor Narrow Aisle Trucks :  Class II - Electric Motor Narrow Aisle Trucks Class II - Narrow Aisle Trucks :  Class II - Narrow Aisle Trucks Truck Classifications:  Truck Classifications Specific to type Type II: Electric, narrow-aisle Class III - Electric Motor Hand or Hand/Rider Trucks:  Class III - Electric Motor Hand or Hand/Rider Trucks Low lift platform Low lift walkie pallet Reach type outrigger High lift straddle High lift counterbalanced Low lift walkie/rider pallet Class III - Electric Motor Hand or Hand/Rider Trucks:  Class III - Electric Motor Hand or Hand/Rider Trucks Class III - Hand & Hand/Rider Trucks:  Class III - Hand & Hand/Rider Trucks Truck Classifications:  Truck Classifications Specific to type Type III: Electric pallet jack Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires:  Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires Fork, counterbalanced (cushion/solid tires) Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires:  Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires Class V - Internal Combustion Engine Trucks - Pneumatic Tires:  Class V - Internal Combustion Engine Trucks - Pneumatic Tires Fork, counterbalanced (pneumatic tires) Class V - Internal Combustion Engine Trucks (Pneumatic Tires):  Class V - Internal Combustion Engine Trucks (Pneumatic Tires) Truck Classifications:  Truck Classifications Specific to type Type V: Internal combustion, pneumatic tire Class VI - Electric & Internal Combustion Engine Tractors:  Class VI - Electric & Internal Combustion Engine Tractors Sit-down rider Class VII - Rough Terrain Forklift Trucks:  Class VII - Rough Terrain Forklift Trucks Straight-mast forklift Extended-reach forklift All rough terrain forklift trucks Rough Terrain Straight Mast Forklifts:  Rough Terrain Straight Mast Forklifts Rough Terrain Extended-Reach Forklifts:  Rough Terrain Extended-Reach Forklifts Slide127:  Forklifts and Other Powered Industrial Trucks Department of Labor and Industries WISHA Services Training and Outreach

Related presentations


Other presentations created by Arkwright26

transportation
07. 11. 2007
0 views

transportation

wonderful world
19. 06. 2007
0 views

wonderful world

2006911155950435
28. 04. 2008
0 views

2006911155950435

dietrich
17. 04. 2008
0 views

dietrich

ME Individual DM JG 2006
16. 04. 2008
0 views

ME Individual DM JG 2006

H106n
14. 04. 2008
0 views

H106n

DM GlobalFDI Movements240306
13. 04. 2008
0 views

DM GlobalFDI Movements240306

may30
10. 04. 2008
0 views

may30

Ulad using crop residues
09. 04. 2008
0 views

Ulad using crop residues

coral reef and climate change
07. 04. 2008
0 views

coral reef and climate change

Ian Brinkley DtF 07 06
30. 03. 2008
0 views

Ian Brinkley DtF 07 06

Temperature
14. 02. 2008
0 views

Temperature

AP Review 1400 1800
20. 02. 2008
0 views

AP Review 1400 1800

New Sony
03. 10. 2007
0 views

New Sony

Literary Vocabulary Rhyme
10. 10. 2007
0 views

Literary Vocabulary Rhyme

Chapter1McMurry
13. 10. 2007
0 views

Chapter1McMurry

FinanceTransition
16. 10. 2007
0 views

FinanceTransition

rexcor baker
15. 10. 2007
0 views

rexcor baker

kakande
28. 11. 2007
0 views

kakande

bernsteintwo
16. 10. 2007
0 views

bernsteintwo

What Is Internal Control
29. 10. 2007
0 views

What Is Internal Control

11 40 063
07. 11. 2007
0 views

11 40 063

Il Nazismo
14. 11. 2007
0 views

Il Nazismo

kryukov 20041004
12. 10. 2007
0 views

kryukov 20041004

1015 1
19. 11. 2007
0 views

1015 1

AI 120 Examples
17. 10. 2007
0 views

AI 120 Examples

galaxy physics
01. 12. 2007
0 views

galaxy physics

Qualitative tools
29. 11. 2007
0 views

Qualitative tools

pannebecker
03. 01. 2008
0 views

pannebecker

infectious
05. 01. 2008
0 views

infectious

b e flows
07. 01. 2008
0 views

b e flows

CSI pres
07. 10. 2007
0 views

CSI pres

1A Quality of our Water
02. 01. 2008
0 views

1A Quality of our Water

OPVII AldusEquity
01. 10. 2007
0 views

OPVII AldusEquity

wheat 1
04. 10. 2007
0 views

wheat 1

Lexical Semantics II
21. 11. 2007
0 views

Lexical Semantics II

manuel scott powerpoint
25. 03. 2008
0 views

manuel scott powerpoint

subspace
19. 06. 2007
0 views

subspace

skos ecoterm 2006
19. 06. 2007
0 views

skos ecoterm 2006

services
19. 06. 2007
0 views

services

Working with Automatic PGA
19. 06. 2007
0 views

Working with Automatic PGA

wider context
19. 06. 2007
0 views

wider context

weinberg wfi
19. 06. 2007
0 views

weinberg wfi

VS Mod Presentation
19. 06. 2007
0 views

VS Mod Presentation

Unicode from a distance
19. 06. 2007
0 views

Unicode from a distance

Unicode AndIndia
19. 06. 2007
0 views

Unicode AndIndia

tunable abw
19. 06. 2007
0 views

tunable abw

Tsunefum Mizuno sep14 05
19. 06. 2007
0 views

Tsunefum Mizuno sep14 05

tlstut
19. 06. 2007
0 views

tlstut

synergy redesign demo
19. 06. 2007
0 views

synergy redesign demo

acadien
19. 06. 2007
0 views

acadien

y report
19. 06. 2007
0 views

y report

Tom Worthington
19. 06. 2007
0 views

Tom Worthington

Millennials
14. 07. 2007
0 views

Millennials

vienna a6
19. 06. 2007
0 views

vienna a6

unit armorer sustainment
28. 02. 2008
0 views

unit armorer sustainment

SCI1010 C2
13. 11. 2007
0 views

SCI1010 C2

Slides 2006 fin year web3
19. 06. 2007
0 views

Slides 2006 fin year web3

MNEaula07
28. 12. 2007
0 views

MNEaula07

OUR SCAVENGER HUNT edited
16. 11. 2007
0 views

OUR SCAVENGER HUNT edited

ImplicationsResearch
03. 01. 2008
0 views

ImplicationsResearch

Jonh Roberts
31. 07. 2007
0 views

Jonh Roberts

wstechnology
19. 06. 2007
0 views

wstechnology

DiapoAnglaisdÃf
23. 10. 2007
0 views

DiapoAnglaisdÃf

QM chip
15. 10. 2007
0 views

QM chip

zend talk
19. 06. 2007
0 views

zend talk

seminarpresent
24. 02. 2008
0 views

seminarpresent

High School Counsellor Session
23. 11. 2007
0 views

High School Counsellor Session

xml cop feb05
19. 06. 2007
0 views

xml cop feb05

Value of Org RWG
19. 06. 2007
0 views

Value of Org RWG

Promo wkshp Downes
13. 03. 2008
0 views

Promo wkshp Downes

yw
17. 10. 2007
0 views

yw

WP1b
15. 10. 2007
0 views

WP1b

Regency Traffic111508 3 1
11. 03. 2008
0 views

Regency Traffic111508 3 1

Superstar
19. 06. 2007
0 views

Superstar

BUS 400
05. 10. 2007
0 views

BUS 400

950321
11. 10. 2007
0 views

950321

perry presentation
04. 03. 2008
0 views

perry presentation

vergados 1
20. 11. 2007
0 views

vergados 1

vlad
19. 06. 2007
0 views

vlad

Darstellung des HH AZM
15. 11. 2007
0 views

Darstellung des HH AZM