PowerIndTrucksslides

Information about PowerIndTrucksslides

Published on February 27, 2008

Author: Maitane

Source: authorstream.com

Content

Powered Industrial Truck 29 CFR 1910.178 Final Rule:  Powered Industrial Truck 29 CFR 1910.178 Final Rule “1.5 million workers operating nearly 1 million powered industrial trucks.” Slide2:  Roughly 100 workers killed per year related to powered industrial truck operations : 95,000 Injured (lost work days) per year Lack of training is one cause of powered industrial truck accidents. OSHA notes that many of the accidents listed could have been caused by improper training. Development of a Training Program:  Development of a Training Program 1910.178 (L)(2)(ii)-Training must consist of a combination of formal classroom instruction, operator practical exercises, and evaluation of the operator’s performance in the workplace 1910.178 (L)(2)(iii)-All operator training and evaluation shall be conducted by persons who have the knowledge, training, and experience to train powered industrial truck operators and evaluate their competence Slide4:  Powered industrial truck operators shall receive initial training in the following topics, except in topics which the employer can demonstrate are not applicable to safe operation of the truck in the employer’s workplace Training Program Content: 1910.178 (L)(3) - Truck Related Topics Content: 1910.178 (L)(3)(i)-:  Truck Related Topics Content: 1910.178 (L)(3)(i)- (A) All operating instructions - warnings and precautions for the types of trucks the operator will be authorized to operate (B) Similarities to, and differences from the automobile: Forklift Narrow wheel track Short wheelbase High structure 3-point suspension Center of Gravity is higher and moves in a significant range w/loads 3 or 4 wheels, Steers from the rear Automobile Wide wheel track Long wheelbase Low structure 4- point suspension Center of Gravity is low and moves in a narrow range 4 wheels , Steers from the front Truck Related Topics Content: 1910.178 (L)(3)(i)- Continued:  Truck Related Topics Content: 1910.178 (L)(3)(i)- Continued (C) Controls & Instruments - Location, What they do, How they operate (D) Engine or Motor - operation and maintenance (E) Steering & Maneuvering (F) Visibility - including restrictions due to loading (G) Fork and attachments - adaptation operations and limitations (H) Vehicle capacity (I) Vehicle stability Truck Related Content Continued: 1910.178 (L)(3)(I):  Truck Related Content Continued: 1910.178 (L)(3)(I) (J) Vehicle Inspection and maintenance / that the operator will be required to perform (K) Refueling and/or charging, recharging batteries (L) Operating limitations - and (M) Any other operating instructions, warnings or precautions listed in the operator's manual for the types of vehicles that the employee is being trained to operate Workplace Related Topics Content Continued: 1910.178 (L)(3)(ii) :  Workplace Related Topics Content Continued: 1910.178 (L)(3)(ii) (A) Surface conditions where the vehicle will be operated (B) Composition of loads to be carried & load stability (C) Load manipulation, stacking , un-stacking (D) Pedestrian traffic in areas where vehicle will be operated (E) Narrow aisles and other restricted places (F) Hazardous classified locations Workplace Related Content Continued: 1910.178 (L)(3)(ii) :  Workplace Related Content Continued: 1910.178 (L)(3)(ii) (G) Ramps and other sloped surfaces that could effect the vehicle’s stability (H) Closed environments and other areas where insufficient ventilation or poor maintenance could cause a buildup of carbon monoxide or diesel exhaust (I) Other unique or potentially hazardous environmental conditions in the workplace that could affect safe operation Other Hazards :  Other Hazards Falling Loads Falling from Platforms, Curbs, Trailers, etc.. Obstructed Views Inattention Riders Vehicle Not Maintained Carbon Monoxide Rough - Uneven - Unleveled floors Unusual Loads Classified Areas Narrow Aisles Pedestrians Training program implementation:  Training program implementation 1910.178 (L)(2)(i) - Trainees may operate a powered industrial truck only: 1910.178 (L)(2)(i)(A) - Under the direct supervision of a person who has the knowledge, training, and experience to train operators and evaluate their competence; and, 1910.178 (L)(2)(i)(B) - Where such operator does not endanger the trainee or other employees Refresher Training 1910.178 (L)(4)(ii):  Refresher Training 1910.178 (L)(4)(ii) Refresher training in relevant topics shall be provided to the operator when: A: The operator has been observed to operate the vehicle in an unsafe manner B: When the operator has been involved in an accident or a near miss incident C: When the operator has received an evaluation that reveals that the operator is not operating the truck safely Refresher Training Continued: 1910.178 (L)(4)(ii):  Refresher Training Continued: 1910.178 (L)(4)(ii) D: The operator is assigned to drive a different type of truck; or E: A condition in the workplace changes in a manner that could affect safe operation of the truck Operator Qualification:  Operator Qualification 1910.178 (L)(1)(i) - The employer shall ensure: each potential operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (L) 1910.178 (L)(1)(ii) - Prior to permitting an employee to operate a powered industrial truck (except for training purposes) the employee has successfully completed the training required by this paragraph (L), except as permitted by paragraph (L)(5) -(Avoidance of Duplicative Training Section) Certification 1910.178 (L)(6) :  Certification 1910.178 (L)(6) The employer shall certify that each operator has : Been trained and evaluated as required in paragraph (L) The certification shall include: Name of Trainee Operator Date of Training Date of the Evaluation Identify the person(s) performing the training and evaluation

Related presentations


Other presentations created by Maitane

Introduction DFT
16. 10. 2007
0 views

Introduction DFT

ch04 org cell
08. 05. 2008
0 views

ch04 org cell

taylor forcefeedback
08. 05. 2008
0 views

taylor forcefeedback

lecture01
07. 05. 2008
0 views

lecture01

majumdar iccs05
02. 05. 2008
0 views

majumdar iccs05

accident causation
02. 05. 2008
0 views

accident causation

452 lecture9
02. 05. 2008
0 views

452 lecture9

JohnAdamCAS
02. 05. 2008
0 views

JohnAdamCAS

v1exploratorium
02. 05. 2008
0 views

v1exploratorium

Ode to a rat
03. 10. 2007
0 views

Ode to a rat

crocodile physics
11. 10. 2007
0 views

crocodile physics

Critical Thinking
12. 10. 2007
0 views

Critical Thinking

Lectures 2
16. 10. 2007
0 views

Lectures 2

USLA
22. 10. 2007
0 views

USLA

Typologie etudiants 2005 2006
24. 10. 2007
0 views

Typologie etudiants 2005 2006

Land Ho The Isthmus Forms
25. 10. 2007
0 views

Land Ho The Isthmus Forms

Nobelpreis 2004
15. 10. 2007
0 views

Nobelpreis 2004

city sadness
01. 11. 2007
0 views

city sadness

ast110 02
13. 11. 2007
0 views

ast110 02

Mura
15. 10. 2007
0 views

Mura

INECOR Amar RACHEDI
24. 10. 2007
0 views

INECOR Amar RACHEDI

Intro RED Presentation
24. 10. 2007
0 views

Intro RED Presentation

MarseilleImprimable
24. 10. 2007
0 views

MarseilleImprimable

EOT Presentation
02. 11. 2007
0 views

EOT Presentation

OM 2005 11
16. 11. 2007
0 views

OM 2005 11

csa2070 Formal slides
16. 11. 2007
0 views

csa2070 Formal slides

AdCooperate
11. 10. 2007
0 views

AdCooperate

CAPTIC2003 SV
23. 10. 2007
0 views

CAPTIC2003 SV

HPS PDS Yu 7 15 2007
01. 01. 2008
0 views

HPS PDS Yu 7 15 2007

f06 wk10
04. 01. 2008
0 views

f06 wk10

69A Job Safety Analysis Bayne
07. 01. 2008
0 views

69A Job Safety Analysis Bayne

Public Procurement Oct04 Notes
07. 01. 2008
0 views

Public Procurement Oct04 Notes

IST444Genomicsequenc ing
16. 10. 2007
0 views

IST444Genomicsequenc ing

informesept2006
22. 10. 2007
0 views

informesept2006

FunDgnCaseStudies2005
04. 10. 2007
0 views

FunDgnCaseStudies2005

SLP PP
22. 10. 2007
0 views

SLP PP

BinghamEtalWAFINAL
04. 12. 2007
0 views

BinghamEtalWAFINAL

ecoI 5
15. 10. 2007
0 views

ecoI 5

LIDAR Leblanc
19. 10. 2007
0 views

LIDAR Leblanc

orlando opening
29. 10. 2007
0 views

orlando opening

limestone
06. 12. 2007
0 views

limestone

212w
05. 10. 2007
0 views

212w

FPBASPSreport2006
04. 10. 2007
0 views

FPBASPSreport2006

The Six Nutrients
04. 03. 2008
0 views

The Six Nutrients

fall trash
29. 02. 2008
0 views

fall trash

icfa korea may05
13. 03. 2008
0 views

icfa korea may05

traveling
03. 04. 2008
0 views

traveling

economic cycle
08. 04. 2008
0 views

economic cycle

LAH FADR 2007 01
21. 10. 2007
0 views

LAH FADR 2007 01

retrospective10year
09. 04. 2008
0 views

retrospective10year

telemonitor full
17. 04. 2008
0 views

telemonitor full

rules
22. 04. 2008
0 views

rules

History 101
23. 10. 2007
0 views

History 101

Agrofuels DrivingClimateChange
07. 04. 2008
0 views

Agrofuels DrivingClimateChange

cdc intervention
31. 10. 2007
0 views

cdc intervention

proj 05
28. 02. 2008
0 views

proj 05

appascom
01. 10. 2007
0 views

appascom

Ross7eCh11
16. 04. 2008
0 views

Ross7eCh11

Sato pres 06
19. 02. 2008
0 views

Sato pres 06

cvamia 2004
20. 02. 2008
0 views

cvamia 2004

QDS
20. 11. 2007
0 views

QDS

poster aises
26. 11. 2007
0 views

poster aises

CM1 NY Swipe Card presentation
28. 09. 2007
0 views

CM1 NY Swipe Card presentation

mississauga
05. 10. 2007
0 views

mississauga

RuralDevSeminar
18. 10. 2007
0 views

RuralDevSeminar

slides prog 65
30. 10. 2007
0 views

slides prog 65

SachsFelix
26. 02. 2008
0 views

SachsFelix

PSC300Week7Tue
23. 12. 2007
0 views

PSC300Week7Tue

Claus xpforedrag
06. 11. 2007
0 views

Claus xpforedrag

pre as18jan48
25. 03. 2008
0 views

pre as18jan48

RA2 conclusions 2
14. 02. 2008
0 views

RA2 conclusions 2