# Projection Systems Ortho and Iso

Information about Projection Systems Ortho and Iso

Published on January 9, 2008

Author: Sigfrid

Source: authorstream.com

Engineering H191 Engineering Fundamentals and Laboratory I:  Engineering H191 Engineering Fundamentals and Laboratory I Week 02 Day 02 Projection Systems: Orthographic and Isometric Objectives:  Objectives Orthographic Projections View Selection Glass Box Approach First and Third Angle Projections Line Precedence Two View Drawings Tips Orthographic Projections:  Orthographic Projections Reference: Technical Graphics, Chap 3: Advantage – Represent features of an object more accurately Example Problem Orthographic Projections:  Orthographic Projections Orthographic Projections are a collection of 2-D drawings that work together to give an accurate overall representation of an object. Defining the Six Principal Views or Orthographic Views:  Defining the Six Principal Views or Orthographic Views Which Views to Present?:  Which Views to Present? General Guidelines Pick a Front View that is most descriptive of object Normally the longest dimension is chosen as the width (or depth) Most common combination of views is to use: Front, Top, and Side View Any other view different from the Principal Views is called an Auxiliary View (see 3.15 in the Technical Graphics text) Glass Box Approach:  Glass Box Approach Most powerful technique to understand orthographic projections Suspend the object with transparent strings inside a glass box Freeze the view from each direction (each of the six sides of the box) and unfold the box Animation illustrates glass-box approach Glass Box Approach:  Glass Box Approach Available on the FEH website: http://feh.eng.ohio-state.edu Lecture Notes Engineering H191 – Autumn 2005 Glass Box Animation Glass Box Approach:  Glass Box Approach Glass Box Approach:  Glass Box Approach Glass Box Approach:  Glass Box Approach Glass Box Approach:  Glass Box Approach Glass Box Approach:  Glass Box Approach Glass Box Approach:  Glass Box Approach First and Third Angle Projections:  First and Third Angle Projections First Angle – International Third Angle – U.S. Conventional Orthographic Views:  Conventional Orthographic Views Is The Orthographic View OK?:  Is The Orthographic View OK? Orthographic Must Be In Projection:  Orthographic Must Be In Projection Hidden and Center Lines:  Hidden and Center Lines For Example::  For Example: 1. Visible 2. Hidden 3. Center Precedence of Lines:  Visible lines takes precedence over all other lines Hidden lines and cutting plane lines take precedence over center lines Center lines have lowest precedence Precedence of Lines Example: Application of Precedence :  Example: Application of Precedence Intersecting Lines in Orthographic Projections:  Intersecting Lines in Orthographic Projections Solid Line Intersections Dashed Line Intersections Reference – Technical Graphics, Chapter 3 Two-View Drawings:  Two-View Drawings Some objects can be fully described by two views, look for: Symmetry or Bodies of Rotation Front View Right Side View Front View Right Side Other Two-View Examples:  Other Two-View Examples Summary:  Summary Introduced to orthographic projections We recommend the software animation exercise introduced in class. Animation can be found on Carmen – Glass Box Theory. Review Questions:  Review Questions Rectilinear grids are used for sketching isometric pictorials … True/False Based on the lines of sight, orthographic projection drawings are classified as ___________ projections There are ____ standard principal views of orthographic projections Each view in an orthographic projection concentrates on ____ dimensions of the object Hints for Orthographic Projection Sketching:  Hints for Orthographic Projection Sketching Identify the major features and overall dimensions of the object Do not use any straight-edge devices as a pencil guide when sketching by hand Start by drawing bounding boxes with light construction lines. Keep views aligned while sketching Hints for Orthographic Projection Sketching:  Hints for Orthographic Projection Sketching Title Information is required – follow conventions Usage of construction lines is encouraged. Mandatory for circle or ellipse Orthographic projection: Alignment of the views is important! Will not be graded, if not aligned Hints for Orthographic Projection Sketching:  Hints for Orthographic Projection Sketching Map inclined and oblique faces to all three views Follow the precedence of lines Darken all visible, hidden, and center lines Sketching a Circle:  Sketching a Circle Draw a square whose sides are the diameter of the circle. At the center of each side define the point of tangency for the circle. Draw the diagonals of the square. Orient the paper so you can draw equal arcs to construct the circle Today's Assignment:  Today's Assignment A11 TG 2.7 and 2.18

29. 02. 2008
0 views

08. 05. 2008
0 views

07. 05. 2008
0 views

02. 05. 2008
0 views

02. 05. 2008
0 views

30. 04. 2008
0 views

24. 04. 2008
0 views

22. 04. 2008
0 views

21. 04. 2008
0 views

18. 04. 2008
0 views

17. 04. 2008
0 views

10. 01. 2008
0 views

10. 01. 2008
0 views

12. 01. 2008
0 views

12. 01. 2008
0 views

13. 01. 2008
0 views

14. 01. 2008
0 views

15. 01. 2008
0 views

15. 01. 2008
0 views

16. 01. 2008
0 views

16. 01. 2008
0 views

16. 01. 2008
0 views

17. 01. 2008
0 views

21. 01. 2008
0 views

15. 01. 2008
0 views

04. 02. 2008
0 views

24. 01. 2008
0 views

12. 02. 2008
0 views

28. 01. 2008
0 views

29. 01. 2008
0 views

06. 02. 2008
0 views

07. 02. 2008
0 views

12. 02. 2008
0 views

14. 02. 2008
0 views

14. 02. 2008
0 views

15. 02. 2008
0 views

05. 02. 2008
0 views

21. 02. 2008
0 views

25. 02. 2008
0 views

27. 02. 2008
0 views

28. 02. 2008
0 views

03. 03. 2008
0 views

11. 03. 2008
0 views

12. 03. 2008
0 views

16. 03. 2008
0 views

19. 03. 2008
0 views

10. 01. 2008
0 views

25. 03. 2008
0 views

07. 02. 2008
0 views

10. 03. 2008
0 views

31. 03. 2008
0 views

03. 04. 2008
0 views

07. 04. 2008
0 views

27. 03. 2008
0 views

28. 03. 2008
0 views

15. 04. 2008
0 views

14. 04. 2008
0 views

23. 01. 2008
0 views

29. 01. 2008
0 views

04. 02. 2008
0 views

09. 01. 2008
0 views

13. 01. 2008
0 views

14. 02. 2008
0 views

16. 01. 2008
0 views

14. 01. 2008
0 views

28. 01. 2008
0 views

05. 02. 2008
0 views

28. 01. 2008
0 views

25. 01. 2008
0 views

17. 01. 2008
0 views

07. 02. 2008
0 views

15. 01. 2008
0 views

11. 01. 2008
0 views

13. 01. 2008
0 views

05. 02. 2008
0 views

23. 01. 2008
0 views

20. 02. 2008
0 views

08. 04. 2008
0 views

16. 01. 2008
0 views

24. 01. 2008
0 views

11. 02. 2008
0 views